Download - Fuji Xerox Printers

SettingBond, Plain, PlainS2, Recycled,Heavyweight,Heavyweight A,Heavyweight B,Heavyweight C,Heavyweight S,Gloss, 1. Custom 1to 5. Custom 5DescriptionThis setting will be used by the Auto Tray Selection feature. Defaults are asfollows: Plain=[1], Recycled=[2], Bond=[3]. Otherwise, the default is [AutoPaper Off].• [1] to [15]Sets the priority order of paper types.• [Auto Paper Off]Does not set the priority order of paper types. In this case, the Auto TraySelection feature is not used.Note• [1. Custom 1] to [5. Custom 5] display the names specified under [CustomPaper Name].• You can assign the same priority order to different paper types. In this case,the printer selects a tray based on the [Paper Tray Priority] setting.[PaperTrayPriority]Printer SettingsPaperTrayPriorityPaperTrayPriorityTray 1PaperTrayPriorityTray 2PaperTrayPriorityTray 3PaperTrayPriorityTray 4PaperTrayPriorityTray 5PaperTrayPriorityTray 6SettingTray 1 to Tray 4,Tray 5, Tray 6DescriptionSets the priority order of the paper trays. This setting will be used by the AutoTray Selection feature. Defaults are as follows: Tray 1=[1], Tray 2=[2], Tray3=[3], Tray 4=[4], Tray 6=[5] and Tray 5=[No AutoTraySwitch].• [1] to [5]Sets the priority order of the paper trays.• [No AutoTraySwitch]Does not set the priority order of paper types. In this case, the Auto TraySelection feature is not used.Note• Tray 2 to Tray 4, and Tray 6 are optional. The display only shows the traysthat are actually installed on the printer.• You cannot assign the same priority to more than one tray. If the samepriority order of other trays are specified, a priority order other than thespecified tray is automatically changed.• Only the lowest priority can be set for Tray 5.194 5 Control Panel Settings