Download - Fuji Xerox Printers

Error CodeCause/Remedy016-702 PCL or PostScript print data could not be processed because of insufficient print page buffer size.Perform one of the following steps.• If the [Image Quality] setting is [High Resolution], change it to [Standard] (PCL print driver) or[High Speed] (PostScript print driver).• On the [Advanced Settings] tab, change the [Print Page Mode] setting to [On]. (PCL only)• Increase the size of the page print buffer.• Install additional memory (optional) to increase memory capacity.Refer to• [Image Quality]/[Print Page Mode]: Online help for the print driver• Print page buffer: “ [Allocate Memory]” (P. 206)016-703 Delayed Print cannot be performed. The HDD Extension Kit (optional) must be installed or specifya RAM disk properly in order to use the Sample Set function.Refer to• “3.7 Printing at a Specified Time - Delayed Print -” (P. 91)016-704 The maximum allowable number of security/sample set documents has been exceeded.Delete unneeded documents accumulated on the printer before trying to print again.016-705 Secure print, Charge Print, or Private Charge Print documents cannot be registered because theHDD Extension Kit (optional) is not installed.The HDD Extension Kit (optional) or RAM disk must be installed in order to use these functions.Refer to• “3.5 Printing confidential documents - Secure Print -” (P. 83)• “3.8 Private Charge Print” (P. 94)• “3.9 Charge Print” (P. 96)016-706 The maximum allowable number of security/sample set users has been exceeded.Delete unneeded documents accumulated on the printer and Secure Print registered users,before trying to print again.016-707 Sample Set print job cannot be performed. The HDD Extension Kit (optional) must be installed orspecify a RAM disk properly in order to use the Sample Set function.Refer to• “3.6 Printing after checking output - Sample Set -” (P. 87)016-708 Printing is not possible because of insufficient hard disk space.Delete unneeded data from the hard disk to free up space.016-710 Delayed printing could not be performed because the HDD Extension Kit (optional) is not installed,or because there is some problem with the hard disk.The HDD Extension Kit (optional) must be installed in order to use the delayed print function.016-711 The specified e-mail size exceeds the maximum allowable value.Reduce the data size of the attached file by lowering the resolution or magnification factor, ordivide the file into multiple parts.016-716 A TIFF file could not be spooled because of insufficient hard disk capacity.Delete unneeded data from the hard disk to free up space.016-718 PCL print data could not be processed because of insufficient memory.Reduce the resolution and try printing again without 2-Sided printing and multiple-up.016-719 PCL print data could not be processed because of insufficient print page buffer size.Increase the size of the page print buffer.016-720 A command that cannot be processed is included in the PCL print data.Check the print data and try printing again.6.7 Error Messages and Error Codes 275