Download - Fuji Xerox Printers

7.13 Adjusting the Image Transfer VoltageWhen problems described below frequently occur, check whether the paper type is correctlyset for printing. Image transfer voltage may not be appropriate if problems occur despite thecorrect setting of the paper type. In this case, perform the procedure below to adjust thevoltage.• White patches on images (reduce the voltage)• Toner scattered around images (increase the voltage)• Overall bluish images (increase the voltage)The image transfer voltage can be adjusted for each paper type within the range of 1 to 16in increments of 1. The initial default setting is [6].1. Press the button on the controlpanel to display the menu screen.SettingsLanguageEmulation2. Press the < > button until [Admin Menu] isdisplayed.SettingsAdmin Menu3. Press the < > or button to select.[Network/Port] is displayed.Admin MenuNetwork/Port4. Press the < > button until [Image Quality]is displayed.Admin MenuImage Quality5. Press the < > or button to select.[Adjust Gradation] is displayed.Image QualityAdjust Gradation6. Press the < > button until [Voltage Offset]is displayed.Image QualityVoltage Offset7. Press the < > or button to select.A screen for setting the paper type isdisplayed.Voltage OffsetPlain8. Press the < > button until the desiredpaper type is displayed. (Example:Heavyweight)Voltage OffsetHeavyweight9. Press the < > or button to select.The current setting appears.Heavyweight•610. Use the < > and < > buttons to enter thenew value. (Example:10)Heavyweight10380 7 Maintenance