Download - Fuji Xerox Printers

SettingTBCP FilterDescriptionSets whether to enable or disable the TBCP filter during processing ofPostScript data.• [Disabled] (default)• [Enabled][UPnP]Network/PortUPnPUPnPPort StatusUPnPPort NumberSettingPort StatusDescriptionSets whether to enable or disable the UPnP port at printer start-up.• [Enabled]• [Disabled] (default)Important• If the printer runs out of memory when the port is enabled, the port issometimes automatically disabled. If this happens, either disable unusedports, or change the memory allocation under [Allocate Memory].Port Number Sets the port number from 1 to 65535. (See *2 on P. 214.)• [80] (default)Note• Set only unique port numbers. Note, however, that InternetServices/IPP/SOAP/UPnP/WSD (See *6 on P. 214) ports and Internet services that useHTTP protocol can share the same port number.[WSD]Network/PortWSDWSDPort StatusWSDPort NumberNote• WSD stands for Web Services on Devices.SettingPort StatusDescriptionSets whether to enable or disable the WSD port at printer start-up.• [Enabled] (default)• [Disabled]Important• If the printer runs out of memory when the port is enabled, the port issometimes automatically disabled. If this happens, either disable unusedports, or change the memory allocation under [Allocate Memory].158 5 Control Panel Settings