Download - Fuji Xerox Printers

3. Starting from the [•] mark on the chart, slide the chart upwards and downwards, andread the scale to determined the difference (margin) between the scale and the ColorSample.Important• Be careful not to mistake the plus (+) and minus (-) directions when reading the scale.Measurement part of Calibration Chart if density of Color Sampleis close the density in-between. if it is close the densityin-between. if it is close the densityin-between. if it is close the densityin-between. if it is close the densityin-between. if it is close the densityin-between. if density of Color Sample isclose the density here. if it is close the density here. if it is close the density here. if it is close the density here. if it is close the density here. if it is close the density here. if it is close the density here.AFor the example on the left, density of theCalibration Chart close to the Color Sampleis at the second position in the negativedirection from the central position or densityA, therefore, the difference is ."-2""-1"Color Sample4. Write the margin value in the appropriate [Margin] box.5. Obtain the margin for two other density areas.376 7 Maintenance