Download - Fuji Xerox Printers

3. Hold the tabs on both sides of a new staplecartridge, and insert it into the originalposition until it clicks.4. Repeat steps 2 and 3 to replace the otherstaple cartridge.5. Close the booklet maker side cover.Note• If the cover is not completely closed, a message willappear and the machine remain paused.Replacement Procedure (for Finisher-C1 with Booklet Maker)When the message Staple Cartridge R1 is displayed on the display, follow the instructionbelow to replace the staple cartridge with a new one.1. Make sure that the machine is notoperating, and open the front door.2. Grasp the handle R1 of the staple cartridgeholder, and pull out the holder to the right,towards you.3. Take the staple cartridge out of the finisher.Note• The staple cartridge is firmly inserted. A slight force isrequired to pull the cartridge out of the finisher.7.1 Replacing Consumables 307