Download - Fuji Xerox Printers

More documents

Recommendations

Info

9. Press the < > button to display [IPAddress].IPv4 SettingsIP Address10. Press the < > or button to select.The current IP address is displayed..IP Address•000.000.000.00011. Enter the value in the first field using the< > or < > button (Example: 192), andpress the < > button.Note• If you do not need to change the setting, press the< > button to advance to the next field.• Pressing the < > or < > button longer increments thevalue by 10.• To return to the previous field, press the < > button.12. Enter the rest of the fields in the samemanner. After entering the last (4th) field(Example: 192.168.1.100), press the button to confirm your entry.13. If you want to change a subnet mask andgateway address, press the buttonand proceed to Step 14.If you want to finish configuring the settings,proceed to Step 21.IP Address192.000.000.000IP Address•192.168.001.100• To change the Subnet Mask/Gateway Address14. Press the < > button until [Subnet Mask]is displayed.IPv4 SettingsSubnet Mask15. Press the < > or button to select.The current subnet mask is displayed.Subnet Mask•000.000.000.00016. Enter the subnet mask in the same way youentered the IP address (Example:255.255.255.000), and press the button to confirm your entry.17. Press the button to return to[Subnet Mask].Subnet Mask•255.255.255.000IPv4 SettingsSubnet Mask18. Press the < > button to display [GatewayAddress].IPv4 SettingsGateway Address19. Press the < > or button to select.The current gateway address is displayed.Gateway Address•000.000.000.000334 7 Maintenance
20. Enter the gateway address in the same wayyou entered the IP address (Example:192.168.1.254), and press the buttonto confirm your entry.21. The setup is now complete.Press the button to close themenu screen.The printer automatically restarts.Gateway Address•192.168.001.25422. Print the [Configuration Report] to verifyyour settings.7.4 Changing an IP Address 335
Page 1 and 2:
DocuPrint C5005 dUser Guide
Page 3:
PrefaceThank you for purchasing the
Page 6 and 7:
3 Printing. . . . . . . . . . . . .
Page 8 and 9:
8 Contents7 Maintenance . . . . . .
Page 10 and 11:
Types of ManualsSetup GuideQuick Re
Page 12 and 13:
Conventions1. In this guide, person
Page 14 and 15:
Electrical SafetyThis product shall
Page 16 and 17:
OthersTo keep this product in a goo
Page 18 and 19:
Never touch the exposed connectorsa
Page 20 and 21:
EnvironmentRegulation• For enviro
Page 22 and 23:
Permission to use, copy, modify, an
Page 24 and 25:
---Portions Copyright (c) 1992-1996
Page 26 and 27:
Illegal Copies and PrintoutsCopying
Page 28 and 29:
• SMB : Used when printing using
Page 30 and 31:
1.2 Connecting a cableConnect the p
Page 32 and 33:
Network ConnectionUse 1000BASE-T (W
Page 34 and 35:
2. Open the front cover.3. Press th
Page 36 and 37:
1.4 Setting the Network Environment
Page 38 and 39:
13. Press the < > button to display
Page 40 and 41:
1.5 Enabling PortsSet all ports you
Page 42 and 43:
• Setting Up a Web BrowserWhen us
Page 44 and 45:
*1 These settings can only be set u
Page 46 and 47:
1.7 Installing a Print DriverTo pri
Page 48 and 49:
No. Name Description10 Tray 5 (Bypa
Page 50 and 51:
Inside1273456No. Name Description1
Page 52 and 53:
No. Name Description13 US 2/3 Hole
Page 54 and 55:
Control Panel1234516151413678910111
Page 56 and 57:
Control Panel DisplayThe display sh
Page 58 and 59:
• When the optional finisher is i
Page 60 and 61:
2.3 Circuit BreakerThe printer is p
Page 62 and 63:
2.4 Setting/Exiting the Energy Save
Page 64 and 65:
Checking the Status of a Print JobT
Page 66 and 67:
Message [Done] appears if the print
Page 68 and 69:
Set Printer Information Manually1.
Page 70 and 71:
3 PrintingThis chapter describes va
Page 72 and 73:
3.2 Printing on EnvelopesThis secti
Page 74 and 75:
5. Select file size in the [Origina
Page 76 and 77:
3.3 Printing on Custom Size or Long
Page 78 and 79:
2. Click the [Device Settings] tab.
Page 80 and 81:
Printing on Custom Size PaperThe fo
Page 82 and 83:
4. For [Paper Tray], select [Automa
Page 84 and 85:
3. The [Paper/Output] tab appears.F
Page 86 and 87:
8. Press the < > or button to sele
Page 88 and 89:
3. For [Job Type], select [Sample S
Page 90 and 91:
9. Enter the number of copies using
Page 92 and 93:
4. Click [Setup].The [Delayed Print
Page 94 and 95:
3.8 Private Charge PrintPrivate Cha
Page 96 and 97:
3.9 Charge PrintCharge Print is ava
Page 98 and 99:
Page 100 and 101:
Printing PDF Files Using CentreWare
Page 102 and 103:
Sending DocuWorks Files Using Lpr C
Page 104 and 105:
E-mail Environment Settings (Printe
Page 106 and 107:
Item Setting Description AvailableS
Page 108 and 109:
Item Setting Description AvailableS
Page 110 and 111:
The [Ready to print] screen appears
Page 112 and 113:
• Paper for 2-Sided PrintingThe f
Page 114 and 115:
Semi Standard PaperIn addition to t
Page 116 and 117:
Paper NameSizeBasis Weight(gsm)Pape
Page 118 and 119:
Limited PaperYou can use the follow
Page 120 and 121:
Storing and Handling PaperPaper sto
Page 122 and 123:
3. Adjust the paper guides to the s
Page 124 and 125:
Loading paper into Trays 1 through
Page 126 and 127:
Paper Sizes/Paper Type for Trays 1
Page 128 and 129:
5. Unscrew the screw of the front g
Page 130 and 131:
Page 132 and 133:
9. Press the < > button until the d
Page 134 and 135:
Note• Bypass tray is set to [No A
Page 136 and 137:
5 Control Panel Settings5.1 Overvie
Page 138 and 139:
Changing the SettingsBasic Procedur
Page 140 and 141:
5.2 Common Menus SettingThis sectio
Page 142 and 143:
SettingDescription2 Sided Printing
Page 144 and 145:
[XPS]Sets XPS related settings.Note
Page 146 and 147:
SettingDescriptionCollated Sets whe
Page 148 and 149:
SettingDescriptionPJLAdobe Protocol
Page 150 and 151:
SettingConnect Time-OutTBCP FilterD
Page 152 and 153:
[SMB]Network/PortSMBSMBPort StatusS
Page 154 and 155:
SettingDescriptionDNSAdded PortNumb
Page 156 and 157:
SettingPrint ModePJLAuto Eject Time
Page 158 and 159:
SettingTBCP FilterDescriptionSets w
Page 160 and 161:
SettingPort StatusDescriptionSets w
Page 162 and 163:
IPv4SettingsSettingIP Address,Subne
Page 164 and 165:
[EP Proxy Server]Important• This
Page 166 and 167:
[Ethernet]Network/PortEthernetEther
Page 168 and 169:
[SNTP Settings]Network/PortSNTP Set
Page 170 and 171:
[System Settings]The [System Settin
Page 172 and 173:
[Low Power Timer]Note• Refer to
Page 174 and 175:
[2 Sided Report]System Settings2 Si
Page 176 and 177:
[Machine Clock]Note• The date and
Page 178 and 179:
[When Jam Occurs]System SettingsWhe
Page 180 and 181:
[Auto Job Promote]Note• This item
Page 182 and 183:
[Authentication]System SettingsAuth
Page 184 and 185:
ChargePrintSettingReceiveControlPro
Page 186 and 187:
[Extra Center Tray]System SettingsE
Page 188 and 189:
SettingDescriptionTransferImageLog-
Page 190 and 191:
[Printer Settings]The [Printer Sett
Page 192 and 193:
SettingDescriptionTray 6 Sets the t
Page 194 and 195:
SettingBond, Plain, PlainS2, Recycl
Page 196 and 197:
[Image Quality]Printer SettingsImag
Page 198 and 199:
[Custom Paper Name]Printer Settings
Page 200 and 201:
[CtrTrayUp-Offset]Printer SettingsC
Page 202 and 203:
[DefaultPaperSize]Printer SettingsD
Page 204 and 205:
Paper size groupInch seriesLoading
Page 206 and 207:
[Allocate Memory] (See *2 on P. 214
Page 208 and 209:
[Image Quality]Adjusts the printer
Page 210 and 211:
[Voltage Offset]Note• For more in
Page 212 and 213:
[Init/Delete Data]The [Init/Delete
Page 214 and 215:
[Language]SettingsLanguageSettingLa
Page 216 and 217:
CAUTION• If you need to pull out
Page 218 and 219:
2. Remove the jammed paper.Note•
Page 220 and 221:
Paper Jams in Tray 6 (HCF B1)The fo
Page 222 and 223:
2. Remove the jammed paper.Note•
Page 224 and 225:
• If paper is jammed in the Fusin
Page 226 and 227:
Paper Jams in Top Left Cover DThe f
Page 228 and 229:
Paper Jams in Duplex Module Cover B
Page 230 and 231:
• Paper Jams in the Finisher Tran
Page 232 and 233:
3. Turn the knob 1 to the left and
Page 234 and 235:
2. Move the handle 2b to the right.
Page 236 and 237:
Paper Jams at H in the Finisher1. O
Page 238 and 239:
3. Remove the jammed paper if there
Page 240 and 241:
6.2 Stapler FaultsA staple jam may
Page 242 and 243:
5. Pull up the metal part of the st
Page 244 and 245:
Staple Jams in Finisher-C1 with Boo
Page 246 and 247:
When Staple Jams occurs in Booklet
Page 248 and 249:
6.3 Hardware Problems (Power Failur
Page 250 and 251:
SymptomThe printer does not print.C
Page 252 and 253:
SymptomPrinting can be rubbed off w
Page 254 and 255:
SymptomText is garbled.Printed outp
Page 256 and 257:
5. Slowly slide the cleaning bars b
Page 258 and 259:
6.7 Error Messages and Error CodesE
Page 260 and 261:
Close Cover N(N: A, B, C or D)Close
Page 262 and 263:
Open Finisher FrontDoor and replace
Page 264 and 265:
MessagePaper JamOpen Finisher Front
Page 266 and 267:
MessageReady ReplaceFuser AssemblyS
Page 268 and 269:
MessageRemove obstructionbetween Bo
Page 270 and 271:
Error CodesError codes are six-digi
Page 272 and 273:
Error CodeCause/Remedy016-506 Image
Page 274 and 275:
Error CodeCause/Remedy016-556 Conne
Page 276 and 277:
Error CodeCause/Remedy016-721 An er
Page 278 and 279:
Page 280 and 281:
Error CodeCause/Remedy018-575 The s
Page 282 and 283:
Page 284 and 285: Error CodeCause/Remedy026-730 The p
Page 286 and 287: Error CodeCause/Remedy116-740 An ar
Page 288 and 289: SymptomClicking [Apply] does not re
Page 290 and 291: Other IPv6 ProblemsSymptomOperation
Page 292 and 293: 7 Maintenance7.1 Replacing Consumab
Page 294 and 295: Replacing Toner CartridgesThe print
Page 296 and 297: 6. Close the front cover.Note• If
Page 298 and 299: 2. Rotate the release lever of the
Page 300 and 301: 14. Rotate the release lever clockw
Page 302 and 303: 3. Lower the cover.Note• You can
Page 304 and 305: 13. Carefully place the old waste t
Page 306 and 307: 5. Insert the front side of the new
Page 308 and 309: 4. Pinch both sides of the empty st
Page 310 and 311: 7. Return the unit to the original
Page 312 and 313: 5. Close the finisher transport cov
Page 314 and 315: Replacing the Fusing UnitThe follow
Page 316 and 317: Resetting the CounterAfter replacin
Page 318 and 319: 5. Remove the new IBT belt cleaner
Page 320 and 321: 3. Take out the Suction Filter R12.
Page 322 and 323: Replacing the 200K Maintenance KitT
Page 324 and 325: 4. Take out the Paper Feed Rolls (3
Page 326 and 327: 7.2 Printing Reports/ListsThis sect
Page 328 and 329: Report/List Name(Name on the Contro
Page 330 and 331: 7.3 Checking the Meter ReadingThe p
Page 332 and 333: Initializing [Meter Report (Print J
Page 336 and 337: 7.5 Monitoring/Managing the Printer
Page 338 and 339: Item Setting DescriptionGeneral Set
Page 340 and 341: 7.7 Checking Machine Serial NumberT
Page 342 and 343: 3. On the [Configuration] tab, clic
Page 344 and 345: Feature Description Refer toInitial
Page 346 and 347: 6. For [Source IP Mask], specify th
Page 348 and 349: SettingWatermark / BackgroundContra
Page 350 and 351: Print Universal Unique IDUUID is an
Page 352 and 353: Layout Templatepreset1preset2preset
Page 354 and 355: Outputting the Audit LogAudit Log d
Page 356 and 357: 7.10 Configuring Encryption Setting
Page 358 and 359: Configuring HTTP Communication Encr
Page 360 and 361: Note• If you reboot CentreWare In
Page 362 and 363: 3. On the menu on the left, click [
Page 364 and 365: 3. On the menu on the left, click [
Page 366 and 367: Auditron Administration FeatureWhen
Page 368 and 369: 7. On the screen that appears, conf
Page 370 and 371: 3. On the [Configuration] tab, clic
Page 372 and 373: Note• You can select multiple sma
Page 374 and 375: Performing CalibrationPrinting a Ca
Page 376 and 377: 3. Starting from the [•] mark on
Page 378 and 379: Inputting Density ValuesUse CentreW
Page 380 and 381: 7.13 Adjusting the Image Transfer V
Page 382 and 383: 7.14 Adjusting the Paper RegiThis e
Page 384 and 385:
384 7 Maintenance23. When the setti
Page 386 and 387:
7.16 Moving the PrinterUse the foll
Page 388 and 389:
ItemsContinuous print speed *1Descr
Page 390 and 391:
ItemsDescriptionContinuous print sp
Page 392 and 393:
ItemsDescriptionPaper TypeBypass Tr
Page 394 and 395:
Supported protocolPowerItemsDescrip
Page 396 and 397:
ItemsDescriptionWeightSpace Require
Page 398 and 399:
Left Top Tray (optional)ItemsDescri
Page 400 and 401:
European PCL • CG Times• CG Tim
Page 402 and 403:
A.3 Life of Consumables and Regular
Page 404 and 405:
A.4 Obtaining Product InformationOb
Page 406 and 407:
Memory capacity1-sidedMemory capaci
Page 408 and 409:
5. Loosen the three screws on the b
Page 410 and 411:
A.6 Installing the HDD Extension Ki
Page 412 and 413:
9. Reinsert the control board back
Page 414 and 415:
5. Loosen the three screws on the c
Page 416 and 417:
17. Press the < > or button to sel
Page 418 and 419:
3. Press the < > side of the printe
Page 420 and 421:
Refer to• List printing procedure
Page 422 and 423:
A.9 Installing the Gigabit Ethernet
Page 424 and 425:
10. Reinsert the control board back
Page 426 and 427:
6. Pull out the handle on the contr
Page 428 and 429:
5. Loosen the three screws on the c
Page 430 and 431:
A.11 Notes and RestrictionsNotes an
Page 432 and 433:
Printing from Macintosh via USB Con
Page 434 and 435:
CSRF Protection for CenterWare Inte
Page 436 and 437:
Pv6 Connection Notes and Limitation
Page 438 and 439:
The settings in the following categ
Page 440 and 441:
• From a security perspective, th
Page 442 and 443:
A.12 Glossary[10BASE-T]A 10 Mbps Et
Page 444 and 445:
[Interface]The point where two thin
Page 446 and 447:
[Resolution]Indicates the detail of
Page 448 and 449:
Demo Print . . . . . . . . . . . .
Page 450 and 451:
Registering Custom Size Paper . . .
Page 452 and 453:
Control Panel Panel Menu TreeMenu T
Page 454 and 455:
From B (previous page)([Network / P
Page 456 and 457:
DSystem Settings Alert Tone off,
Page 458 and 459:
FPrinter SettingsSubstitute Tray•
Page 460 and 461:
IImage Quality Adjust Gradation Tex
Page 462:
DocuPrint C5005 d User GuideFuji Xe
show all

Download - Fuji Xerox Printers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?