Download - Fuji Xerox Printers

[Adjust Finisher]Adjust the punch hole position or fold position when the Finisher-B1 (optional) and theFinisher-B1 with Booklet Maker Unit (optional) is installed.Admin MenuAdjust FinisherAdjust FinisherHole Punch ToolAdjust FinisherPunch PositionAdjust FinisherBookFoldPositionSettingHole Punch ToolPunch PositionBookFoldPositionDescriptionSelects the type of installed hold punches (optional).• 2/4 Hole Punch• 2/3 Hole Punch (US)Note• This option can be set when 2/4 Hole Punch or 2/3 Hole Punch (US) isinstalled.Selects the tray that the paper to use is set. You can also adjust the punchposition.• [Smaller than B4]Selects the tray settings when using the paper of A4 or 8.5x11” size.You can also adjust the punch position with 0.5mm increments in between5.0 mm to 15.0 mm. The default value is 10.0 mm.• [B4 or larger]Selects the tray settings when using the paper of A3 or 11x17” size. You canalso adjust the punch position with 0.5mm increments in between 5.0mm to15.0mm. The default value is 10.0 mm.Note• This option can be set when 2/4 Hole Punch or 2/3 Hole Punch (US) isinstalled.Selects the tray that the paper to use is set. You can also adjust the foldingposition.• [Smaller than B4]Selects the tray settings when using the paper of A4 or 8.5x11” size.You can also adjust the staple or folding position with 0.5mm increments inbetween 0 mm to 10.0 mm. The default value is 0 mm.• [B4 or larger]Selects the tray settings when using the paper of A3 or 11x17” size. You canalso adjust the staple or folding position with 0.5mm increments in between 0mm to 10.0 mm. The default value is 0 mm.Note• This option is displayed when Booklet Maker Unit for Finisher-B1 is installed.5.2 Common Menus Setting 211