Download - Fuji Xerox Printers

Setting Example: Changing the Sleep Mode TimerIn this example, we will set the Sleep Mode Timer for operations in common menus to 60minutes.1. Press the button on the controlpanel to display the menu screen.SettingsLanguageEmulation2. Press the < > button until [Admin Menu] isdisplayed.Note• If you went past the desired item, return to the item bypressing the < > button.3. Press the < > or button to select.Move on to the next lower level.Note• If you pressed the < > or button on the wrongitem, return to the previous screen by pressing the< > or the button.• To start over from the beginning, press the button.4. Press the < > button until [SystemSettings] is displayed.SettingsAdmin MenuAdmin MenuNetwork/PortAdmin MenuSystem Settings5. Press the < > or button to select.Move on to the next lower level.System SettingsAlert Tone6. Press the < > button until [Sleep ModeTimer] is displayed.System SettingsSleep Mode Timer7. Press the < > or button to select.The current set value is displayed.Sleep Mode Timer•1 Minutes Later8. Press the < > or < > button to display [60Minutes Later].Note• Holding down the < > or < > button scrolls throughthe options in a circular fashion.9. Press the button to confirm yourselection.The value is accepted.Sleep Mode Timer60 Minutes LaterSleep Mode Timer•60 Minutes Later10. The setting is now complete.Press the button to return to the[Ready to print] screen.Ready to printK C M Y5.1 Overview of the Common Menus 139