Download - Fuji Xerox Printers

[Language]SettingsLanguageSettingLanguageDescriptionSets the display language for the control panel.• [English] (default)The display language is English.• [Trad. Chinese]Displays screen messages in traditional Chinese.• [Simp. Chinese]Displays screen messages in simplified Chinese.• [Korean]Displays screen messages in Korean.*1When [Auto] is selected, data will be deleted if the language emulation automaticallyselected is not present or is unavailable on the printer.*2 Holding down the < > or < > button cycles through the options. To display a setting'sdefault value, press < > and < > at the same time.*3 The following information is printed in each line during dump printing:CountHexadecimal codeASCII code*4 Character ListPrints the total number of bytes counted from the beginning ofthe job data.Prints print data delimited in 4 bytes in hexadecimal format.Prints print data using JIS X0201 8-bit coded characters.Characters that are not defined in JIS X0201 are printed as“UD”.No. Type Characters1 Blank Space2 Alphabet ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz3 Numerals 01234567894 Symbols !"#$%&'()*+,-./:;q=r?@m\n^_`*5• When [Enabled] is set, and the print mode is set to [HexDump], PJL commands arealso output by [HexDump].• When language emulation not installed on the printer is specified by a PJLcommand, data is deleted.*6 WSD stands for Web Services on Devices.214 5 Control Panel Settings