Download - Fuji Xerox Printers

5. Unscrew the screw of the front guide andremove the guide from the tray.6. Insert the small protrusions at the bottom ofthe guide into the holes corresponding tothe paper size (1). Insert the protrusion onthe tray into a hole corresponding to thepaper size on the top of the guide, andtighten up the screw (2).7. Pull up the lever of the end guide (1). Movethe lever along the slot, and set it at theposition corresponding to the paper size(2). And then press the lever down (3).Important• Adjust the end guide correctly to the size of the paper.If the end guide is not adjusted correctly, the machinecannot feed the paper properly, resulting in paperjams.Note• The slot to the left of 8.5" is not used.8. Open the end guide (1), and load and alignthe edge of the paper against the right edgeof the tray with the side to be printed onfacing up (2).Important• Do not load paper of different types into the tray. Doingso can cause paper jams.• Do not load paper above the maximum fill line. It maycause paper jams.9. Close the end guide securely.128 4 Paper