Download - Fuji Xerox Printers

MessageReady ReplaceFuser AssemblySymptom/Cause/RemedyNeeds to replace the fusing unit. Contact our Customer Support Center or yourdealer.Note• Pressing the button will display detailed information on the controlpanel.Ready ReplaceFuser Assembly soonNeeds to replace the fusing unit soon. Contact our Customer Support Center or yourdealer.Note• Pressing the button will display detailed information on the controlpanel.Ready ReplaceIBT CleanerThe IBT Belt Cleaner, Odor Filter and Suction Filter need to be replaced soon. Usethe 160K Maintenance Kit to replace them.ReadyTrans. RollReplaceNote• Pressing the button will display detailed information on the controlpanel.The 2nd BTR Unit and Paper Feed Rolls need to be replaced soon. Use the 200KMaintenance Kit to replace them.Note• Pressing the button will display detailed information on the controlpanel.Ready to print***-***There may be something wrong with the printer.Switch the power off, wait for the display to go out, and switch the power back onagain. If the same error code reappears, check the error code (***-***) on the displayand take appropriate action.Refer to• “ Error Codes” (P. 270)Ready to printCheck USBThe number of USBs in use exceeds the maximum number of the ones that can beconnected concurrently.Disconnect the unnecessary USB.Note• Pressing the button will display detailed information on the controlpanel.Ready to printDNS update failedFailed to update IPv4/IPv6 address or host name for DNS.Check the DNS server settings.Note• Pressing the button will display detailed information on the controlpanel.Refer to• CentreWare Internet Services online helpReady to printDuplicate IPvx(vx: v4 or v6)An IPv4 or IPv6 address is duplicated.Change the IP address.Note• Pressing the button will display detailed information on the controlpanel.Refer to• “ Setting an IP Address (IPv4)” (P. 36)• “ Setting an IP Address (IPv6)” (P. 39)266 6 Troubleshooting