Download - Fuji Xerox Printers

4.2 Loading PaperThis section explains how to load paper in the bypass tray or trays 1 to 4, and 6.Note• When the machine runs out of paper during printing, a message appears on the control panel. Addpaper according to the message instructions. Printing automatically resumes when paper is added.Loading Paper in the Bypass TrayImportant• Make sure to load paper when the power is on.• Do not load paper of different types in the same tray.• Do not remove paper from or add paper to the paper trays during printing. Doing so can cause paperjams.• Do not place any objects other than paper on the bypass tray. Do not push down the tray or apply anexcessive force to the tray.1. Lower the bypass tray.Extend the tray as required. The extensiontray can extend two levels.2. Load the paper with the print side facingdown.Important• Do not load paper of different types and sizes into thetray. Doing so can cause paper jams.Important• If the paper will not feed into the machine whenprinting thick paper, curl the leading edge of the paperas shown in the illustration and then load it into thetray. However, paper that is overly curled or creasedwill cause paper jams.Note• A different loading method is used when loadingenvelopes, labels, and long size paper. Refer to“ Bypass Tray Feed Orientations for Envelopes”(P. 122) and “3.3 Printing on Custom Size or Long-sizePaper” (P. 76).4.2 Loading Paper 121