Download - Fuji Xerox Printers

2.3 Circuit BreakerThe printer is provided with a circuit breaker. In the event of a current leakage, the circuitbreaker will automatically cut off the power circuit to prevent any leakage of fire fromoccurring. Check that the circuit breaker works properly at least once a month. Be sure toestablish a ground for the machine. Without a proper ground, the circuit breaker may bedisabled, causing a risk of electric shock.If you have any problems with the circuit breaker, contact our Customer Support Center oryour dealer.The following describes how to check the circuit breaker.1. Press the < > side of the printer’s powerswitch to turn off the power.Note• Make sure that the display is blank and the button does not light up.2. Open the front cover.3. Press the < > side of the printer’s mainpower switch to turn off the main power.Note• The lamp goes out on the controlpanel.4. Press the button.Note• Confirm that the button will stay pressed even after thepushing force is released.button60 2 Basic Operation