Download - Fuji Xerox Printers

1 Printer Environment SettingsWhen you are finished installing your printer using the ‘Setup Guide’, go on to set up itsoperating environment.1.1 Supported Operating EnvironmentsThe printer can be used both as a local and a network printer. When used as a local printer,the printer is connected directly to a computer. Connect the printer to a network for use asa network printer.Set all ports you want to use to [Enabled] on the control panel.InternetIPPLocal ConnectionParallel/USBNetwork ConnectionLPD/SMB/Port9100/EtherTalk/WSD*Network ConnectionNetWare/Windows Shared PrinterServer*: WSD stands for Web Services on Devices.• Using the Printer as a Local PrinterWhen using the printer as a local printer, the printer and a computer can be connected usingthe following methods:• USB connection: Connecting the printer and a computer using a USB cable.(default: [Enabled])• Parallel connection: Connecting the printer and a computer using a parallel cable. To usethis feature, the Parallel Port Kit (optional) must be installed.(default: [Disabled])• Using the Printer as a Network PrinterWhen using the printer as a network printer, the printer can be set up in the followingenvironments:• LPD: Used when using TCP/IP protocol to enable direct communicationbetween the printer and a computer. (default: [Enabled])• Port9100 : Used when using a Port9100 port.(default: [Enabled])• NetWare ® : Used when sharing and managing the printer using a NetWare server.(default: [Disabled])1.1 Supported Operating Environments 27