Download - Fuji Xerox Printers

7.8 Enabling a RAM DiskThe following describes how to enable a RAM Disk.If you enable a RAM Disk, Sample Set/Secure Print/Private Charge Print/Charge Print/Delayed Print can be used without installing the HDD Extension Kit (optional).Important• When using a RAM Disk, if you turned on and off the machine, all the stored documents will be removed.Note• When printing a large amount of data using a RAM Disk, the data to be transferred is divided.1. Press the button on the controlpanel to display the menu screen.SettingsLanguageEmulation2. Press the < > button until [Admin Menu] isdisplayed.SettingsAdmin Menu3. Press the < > or button to select.[Network/Port] is displayed.Admin MenuNetwork/Port4. Press the < > button until [SystemSettings] is displayed.Admin MenuSystem Settings5. Press the < > or button to select.[RAM Disk] is displayed.System SettingsRAM Disk6. Press the < > or button to select.RAM Disk• Disabled7. Press the < > button.8. Press the button.RAM DiskEnabledSetting on the Print Driver’s Property (Computer Side)The following setting is required on the print drivers’ property page. You need to specify the[RAM Disk] to [Installed]. This explains the case when using Windows XP as an example.Refer to• Refer to the print driver’s online help for more information on print driver’s each menu.1. From the [Start] menu, select [Printer and FAX] ([Printer] or [Devices and printer]depending on the Operating System)].2. Select the printer icon on this printer, and then click [Properties] from the [File] menu.7.8 Enabling a RAM Disk 341