Download - Fuji Xerox Printers

1.4 Setting the Network EnvironmentThis section explains how to install your printer in a TCP/IP environment. When installingthe printer in a different environment, refer to the ‘CD-ROM Documentation (HTML)’ on theDriver CD Kit CD-ROM.Note• The printer can use an IPv6 address in an IPv6 network environment. For information on using IPv6addresses, refer to “Setting an IP Address (IPv6)” (P. 39).Setting an IP Address (IPv4)To use TCP/IP protocol, you must configure an IP address for the printer.By default, the printer is set to obtain its IP address (via the [Get IP Address] setting on thecontrol panel) using [DHCP/Autonet]. Thus, when the printer is connected to a network thathas a DHCP server, the printer automatically obtains its IP address from the server.Print the [Configuration Report] to see if the printer already has an IP address.If the printer does not have an IP address, set [Get IP Address] to [STATIC] and configurethe address.If an IP address is listed, skip thefollowing procedure.If an IP address is not listed, or ifyou want to change the currentIP address, configure the settingusing the procedure in [To Setthe IP address].Note• For information on how to print the [Configuration Report], refer to “7.2 Printing Reports/Lists” (P. 326).• The printer can also obtain its IP address by using a BOOTP or RARP server. If using a BOOTP orRARP server, set [Get IP Address] to [BOOTP] or [RARP].• If using a DHCP server, the printer’s IP address may change without notice. Make sure to check theaddress periodically.The following explains how to set up an IP address on the Control Panel. Depending on yournetwork environment, your printer also needs a subnet mask and gateway address. Consultyour network administrator for the settings required for your printer.• To Set the IP AddressImportant• Addresses including IP address, subnet mask and gateway address depend on your networkenvironment. Consult your network administrator for setting the addresses.1. On the control panel, press the button to display the menu screen.SettingsLanguageEmulation36 1 Printer Environment Settings