Download - Fuji Xerox Printers

7.14 Adjusting the Paper RegiThis explains how to adjust the print position vertically (Lead Regi) or horizontally (SideRegi) from the control panel when the position is out of alignment.You can set the value between -2.0 mm to +2.0 mm, with 0.5mm increments.Note• The chart for Paper Regi adjustment is printed based on the loaded paper on the specified tray.• When printing the chart for Paper Regi adjustment in Tray 5 (Bypass tray) that is not set for Auto trayselection, load the A4 paper to Tray 5.• Vertical adjustment (Lead Regi) can be set per tray, however, all the values are the same.This explains the case where adjusting the face side (1 sided) using Tray 2 (optional).1. Press the button on the controlpanel to display the menu screen.SettingsLanguageEmulation2. Press the < > button until [Admin Menu] isdisplayed.SettingsAdmin Menu3. Press the < > or button to select.[Network/Port] is displayed.Admin MenuNetwork/Port4. Press the < > button until [Image Quality]is displayed.Admin MenuImage Quality5. Press the < > or button to select.[Adjust Gradation] is displayed.Image QualityAdjust Gradation6. Press the < > button until [Adjust PaperRegi] is displayed.Image QualityAdjust Paper Regi7. Press the < > or button to select.[Tray 1] is displayed.Adjust Paper RegiTray 18. Press the < > button until [Tray 2] isdisplayed.Adjust Paper RegiTray 29. Press the < > or button to select.[Adjust Side 1] is displayed.Tray 2Adjust Side 110. Press the < > button until [PrintChart-1Sided] is displayed.Tray 2PrintChart-1Sided382 7 Maintenance