Download - Fuji Xerox Printers

• An interactive parallel interface feature is provided as a Parallel Port Kit.• An installation of Gigabit Ethernet Board Kit helps the network’s communication speedfaster, however, it does not improve the total printing time.• A Parallel Port Kit and Gigabit Ethernet Board Kit cannot be installed on the samemachine concurrently.• HDD Extension Kit (optional) is required for direct printing with CentreWare InternetServices. No HDD Extension Kit (optional) required when using ContentsBridge.Meter Counts for 2-Sided Print PagesDepending on the application being used and the print quantity setting, the application mayinsert a blank page into two-sided print jobs in order to adjust page position. In such cases,the blank page is counted as 1 page.Meter Count for WatermarkWhen the Feature Enhance Kit (optional) is installed and a document is printed using theWatermark feature, the meters count with the following method:When the target page is shown in color, the page is counted towards the Total Colorregardless of color settings for watermark.When the target page is shown in Black & White:If you specified the watermark in color, the page is counted towards the Total Color.If you specified the watermark in B&W, the page is couted towards the Total Black.PostScript DriverSome options such as [Poster] are not supported by the PostScript driver. With the [PagesPer Sheet(N-Up)], you can specify 2, 4, 6, 9, or 16 pages up, and with or without frameborders.XPS DriverAn XPS (XML Paper Specification) driver is a print driver for printing with an application orsoftware developed for Microsoft Windows ® operating systems such as Windows Vista orlater versions.Due to compatibility problems with Microsoft Windows Vista, normal printing may not bepossible with applications and software developed for Windows versions prior to WindowsVista.Before using the XPS driver, be sure to check whether the XPS print feature of the printeryou are using is enabled. Unexpected paper output may occur when an XPS driver is usedon a printer that does not have an XPS feature.Selecting [Auto Detect] for [Output Color]When [Color (auto-detect)] is selected in the [Color mode] with the print driver and theprinting data has some color pages, the printer switches to the color mode automatically.The drums or toners of Yellow, Magenta, or Cyan may be consumed after the first detectedcolor page. (B&W pages are counted as B&W in the meter.)To avoid printing B&W pages in color, change [Color (auto-detect)] to [Mode switch perpage] on the Control Panel. However, in this case, printing performance may declinebecause of occurring of mode change during printing. Also, life of drum cartridge may beshorter as the number of rotations in vain increases because of frequent mode changes.A.11 Notes and Restrictions 431