Download - Fuji Xerox Printers

[SMB]Network/PortSMBSMBPort StatusSMBTransportProtocolSMBPrint ModeSMBPJLSMBTBCP FilterSettingPort StatusDescriptionSets whether to enable or disable the SMB port at printer start-up.• [Enabled] (default)• [Disabled]Important• If the printer runs out of memory when the port is enabled, the port issometimes automatically disabled. If this happens, either disable unusedports, or change the memory allocation under [Allocate Memory].TransportProtocolSets the protocol of the transport layer used by SMB.Either or both of NetBEUI and TCP/IP can be selected.• [TCP/IP,NetBEUI] (default)• [TCP/IP]• [NetBEUI]Note• When using TCP/IP protocol, both the printer and client computers musthave IP addresses.Print ModePJLTBCP FilterSets the method of processing data (language emulation).• [Auto] (default)After receiving data from a computer, the printer automatically detects itslanguage emulation and processes the data accordingly. (See *1 on P. 214.)• [PS] [ESCP] [HP-GL/2] [PCL] [TIFF] [KS] [KSSM] [KS5895]After receiving data from a computer, the printer processes the data with theselected print language.• [HexDump]Allows you to view data received from a computer by printing it in ASCII code(hexadecimal format). (See *3 on P. 214.)Sets whether to enable or disable PJL commands that are sent from thecomputer.PJL commands control print jobs, and are required to print jobs using the printdriver. Use of PJL commands allows you to specify the language emulation forthe next job while another language emulation is being processed by theprinter. (See *5 on P. 214.)• [Enabled] (default)• [Disabled]Sets whether to enable or disable the TBCP filter during processing ofPostScript data.• [Disabled] (default)• [Enabled]152 5 Control Panel Settings