Download - Fuji Xerox Printers

• When the optional finisher is installedNote• The [Please wait...] message indicates that the machine is warming up. The printer is not availableduring warming up.• Refer to “ Error Messages (in Alphabetical Order)” (P. 258) when the error message is displayed.• If the printer does not power on, check the following:• The power cord is plugged in.• The main power is switched on.• The button is in the depressed position.Switching the Power OffImportant• Do not switch the power off when the display reads [Please wait...] on the control panel.• Do not switch the power off during printing. Doing so can cause paper jams.• Switching off the power may erase any print data that remains in the printer or information stored in thememory of the printer.• Power off processing is performed internally on the printer for a while after the power is switched off( button blinks). Make sure the button is completely turned off beforeswitching on the printer again.1. Make sure that the printer is not in processby checking lamps or the display on thecontrol panel.2. Press the < > side of the printer’s powerswitch to turn off the power.• When the optional finisher is installed58 2 Basic Operation