Download - Fuji Xerox Printers

No. Name Description13 US 2/3 Hole Punch Kit (USstandard) or2/4 Hole Punch Kit (optional)14 Center tray (Finisher transportcover F)Hole-punches outputs.Note• The distance between the two holes made with the US 2/3 Hole PunchKit (US standard) is 70 mm, which is different from the 80 mm distancemade with the 2/4 Hole Punch Kit.Prints are delivered here when they are unable to be delivered to the rightmiddle tray. Pull the cover upward when removing jammed papers.Note• Remove outputs delivered to the center tray frequently.Note• The power cord connected to the Finisher-B1 is a connecting cord dedicated to the printer.Do not connect this cord to any other devices than the printer.• The HDD Extension Kit (optional) is required when installing the finisher.• Installing the Tray AttachmentWhen delivering A4 or B5 paper to the right middle tray without stapling, you can stackthe outputs more neatly by installing the tray attachment supplied with the right middle tray.1. Remove the tray attachment from the rearof the right middle tray.2. Install the tray attachment onto the middleof the right middle tray as shown in thediagram.52 2 Basic Operation