Administration HiPath 3000/5000 V7 IP systems

3000sb2.fm
For internal use only HiPath 3000 System Overview
HiPath 3500
2.7.6 Additional Power Supply from the EPSU2-R
An EPSU2-R external power supply must be used if the total number of U P0/E stations, analog
stations, and stations connected using adapters is greater than 72.
Additional power can be made available by connecting the external EPSU2-R power supply. To
do this, connect the DC port on the EPSU2-R to the special –48 V DC input on the UPSC-DR.
The UPSC-DR’s internal -48-V output is deactivated when the external power supply is connected.
The additional EPSU2-R external power supply unit is installed in the ECR.
EPSU2-R technical specifications
Table 2-29 EPSU2-R - Technical Specifications
EPSU2-R
S30122-K7221-X900
Scope of delivery ● EPSU2-R AC/DC converter without batteries
● Operating instructions
● Network connection cable from ECR to HiPath
3500 or HiPath 3300: C39195-Z7001-C14
AC power 100 - 240 V Ac
Frequency range 47 to 63 Hz
Connected output 200W
Output power consumption/nominal
output
140W
Mains/nominal voltage 54.2 V
UPS batteries V39113-W5123-E891
Batteries are not included in the scope of supply and
must be ordered separately.
P31003-H3570-Y100-4-7618, 2007-10-31
HiPath 3000/5000 V7, System Description 2-63