Administration HiPath 3000/5000 V7 IP systems

3000sb5.fm
Serviceability For internal use only
Options in the Service Department
5.3.8.3 Manual Error Correction With HiPath 3000/5000 Manager E
Initiating Restart (Reset)
This initiates an immediate hard restart of the entire system with the current CDB.
Initiating Reload Card
This the single board (loading Loadware) to reload.
Locking out and Releasing Boards and Ports
HiPath 3000/5000 Manager E enables you to lock out an entire subscriber line module or line
circuit module and individual ports. The lockout prevents renewed seizure after the current connection
has finished. Lockout or release settings are also retained after a reset.
You cannot lock out the first SLMO/SLU board because administration through the Manager T
uses its first two ports.
If you try to lock out the last active trunk, you will be notified that remote service through the
service center is no longer possible.
You cannot use HiPath 3000/5000 Manager E to release boards and ports locked out with the
lockout switch.
ALUM
You cannot initiate a power failure transfer to analog telephones using HiPath 3000/5000 Manager
E.
P31003-H3570-Y100-4-7618, 2007-10-31
5-28 HiPath 3000/5000 V7, System Description