Administration HiPath 3000/5000 V7 IP systems

3000sb2.fm
HiPath 3000 System Overview For internal use only
HiPath 3800
● Bridging times
The following table lists the maximum bridging times (battery operation in case of power
failure) available with the battery pack S30122-K5950-Y200 (48 V/7 Ah) and battery housing
BSG 48/38 (S30122-K5950-F300).
Table 2-4 LUNA2 - Bridging Times with Battery Pack 48 V/7 Ah and Upright Battery
Housing BSG 48/38
BSG 48/38
System Power supply unit Load levels Maximum bridging
time
HiPath 3800 2 x LUNA2 per system cabinet as
PSU
1 x LUNA2 per system cabinet as
battery charger
1 x battery pack 48 V/7 Ah per system
cabinet
HiPath 3800 5 x LUNA2 boards per system
1 x BSG upright battery housing
48/38 per system
(LUNA2 is not required as a battery
charger as the BSG 48/38 battery
cabinet features a built-in charger.)
Measurement conditions:
You can use a BSG 48/38 battery cabinet in an upright housing instead of the battery pack to
extend the bridging time in the event of a power failure. The BSG 48/38 battery cabinet
(S30122-K5950-F300) consists of
● an upright housing
● a charging rectifier
● a battery set (38 Ah/48 V)
60% nominal
load
60% nominal
load
25 min
1h 30min
● All measurements were performed at a room temperature of approximately 22 °C
(71.6 °F).
● The batteries were new and fully charged when measurement started.
The battery cabinet is designed for direct connection to the HiPath 3800 communication system.
P31003-H3570-Y100-4-7618, 2007-10-31
2-18 HiPath 3000/5000 V7, System Description