Administration HiPath 3000/5000 V7 IP systems

3000sb7.fm
Workpoints For internal use only
optiPoint 500 Product Family
Key Programming
> Double key assignment
The programmable function keys of the optiPoint 500 telephones and the optiPoint
key modules can have double assignments if only numbers without LED support are
saved on the first level. It is also possible to program numbers without LED support
on the second level. These can be internal station numbers, DID numbers and numbers
from a HiPath network.
When the Shift function is pressed, the LED lights the Shift key. This signals that the
phone numbers on the second key level are available. The Shift function is deactivated
after 5 s or after you press a phone number or if the you press the Shift key
again.
The optiPoint BLF function keys cannot have double assignments.
HiPath 3000/5000 < V3.0 does not automatically detect optiPoint 500 telephones; it treats them
as if they were optiset E telephones:
optiPoint 500 telephone Generation/detection by HiPath 3000/5000 and HiPath
3000/5000 Manager E
optiPoint 500 entry –> optiset E basic
optiPoint 500 economy –> optiset E advance plus/comfort
optiPoint 500 basic –> optiset E advance plus/comfort
optiPoint 500 standard –> optiset E advance plus/comfort
optiPoint 500 advance –> optiset E advance plus/comfort + optiset E key module
Because optiPoint 500 advance has more function keys (4 + 15) than any optiset E telephones
(max. 4 + 8), the system generates an optiset E advance plus/comfort with optiset E key module
for the optiPoint 500 advance. HiPath 3000/5000 Manager E also recognizes this combination.
Use the 4 + 8 function keys of the optiset E advance plus/comfort and the first 7 keys of the
optiset E key module to program the 4 + 15 function keys of the optiPoint 500 advance.
P31003-H3570-Y100-4-7618, 2007-10-31
8-60 HiPath 3000/5000 V7, System Description