Administration HiPath 3000/5000 V7 IP systems

3000sb4.fm
For internal use only HiPath 3000/5000 in the LAN Network
Applications over IP
4.8 Applications over IP
4.8.1 Call Detail Recording Central (CDRC) via IP
In HiPath 3000/5000, you can start up the central call data output function only once, which
means that it is available to only one application at a time. Three different modes exist to support
the various requirements of the different applications.
Model-Specific Data
Subject HiPath 3800 HiPath 3750
HiPath 3700
4.8.1.1 TFTP Client in HiPath 3000/5000
HiPath 3550
HiPath 3500
HiPath 3350
HiPath 3300
Feature available in x x x x
Hardware requirements
HG 1500 / LIMS HG 1500 / LIM
Software requirements
V5.0 or later V1.2 to V6.0 V1.2 or later V1.2 or later
HiPath 3000/5000 External application
TFTP client
TFTP protocol
TFTP
server
Alternative
server
Controlled by a programmable timer and a fixed threshold value determining the call data buffer
capacity (around 80 percent of the call data buffer full), the TFTP client (HiPath 3000/5000)
sends call data to the TFTP server (external application). If the system cannot set up a connection
to the TFTP server, it addresses an alternative server. If this server is also unavailable,
it outputs an SNMP trap or error message (“Unable to output data”). The system tries to set up
another connection every 60 seconds. A call data buffer overflow causes an error message to
be entered in the error history file.
P31003-H3570-Y100-4-7618, 2007-10-31
HiPath 3000/5000 V7, System Description 4-71