Administration HiPath 3000/5000 V7 IP systems

3000sb6.fm
For internal use only Middleware
HiPath TAPI 120 V2.0
6 Middleware
6.1 HiPath TAPI 120 V2.0
The 1st party CTI functionality is available for all HiPath 3000 models in conjunction with HG
1500. Up to six TAPI 120 can be operated without a license. Licenses are mandatory for any
additional TAPI 120s installed. The software, installation manual, and additional information
(data sheet) can be found on the Internet at http://www.siemens.com/enterprise.
6.1.1 HiPath TAPI 170 V2.0
This TAPI driver supports Microsoft TAPI 2.1 (Windows NT 4.0) and TAPI 3.0 (Windows 2000/
XP). The software is enabled by a license server. Test software, installation, manual and additional
information (data sheet) can be found on the Internet at http://www.siemens.com/enterprise.
Server Operating
systems
Clients Operating systems
Connection
variants
Basic software
package
CSTA CSTA
Interfaces
Windows NT 4.0 (SP 6 or higher) or Windows 2000
Windows†98, Windows NT 4.0 (SP 6 or higher), Windows 2000
or Windows XP Professional
V.24, S0 or LAN
10 clients, 4 expansion packages up to 10, 25, 50 and 100 clients
Depending on the model, up to four interfaces are available
Applications Several applications can run in parallel, but they cannot send
conflicting commands or be mutually exclusive
Monitor points 1000
Four monitor points are required, for example, to monitor a station
with four applications over CSTA
Call number Maximum of 6 digits
length
Load behavior incoming calls are rejected (busy) as soon as a traffic volume of
1400 BHCA is exceeded. This happens when more than four
calls are received within ten seconds. This does not affect call
traffic within the node
P31003-H3570-Y100-4-7618, 2007-10-31
HiPath 3000/5000 V7, System Description 6-1