Administration HiPath 3000/5000 V7 IP systems

3000sb10.fm
For internal use only Output Formats for Call Detail Recording
11 Output Formats for Call Detail Recording
While the HiPath 3000/5000 systems are in operation, CDRC call details for each completed
section of a call or for each incoming call can be sent to a connected device on an ongoing basis.
This device is normally a PC, which evaluates the data received, or a printer.
Options for Exporting the Data to an External Output Device:
● Application programming interface (V.24)
CDRC data is exported to call detail recording applications such as Teledata.
● PC attendant console port
Users can also forward the CDRC data to an optiClient Attendant (PC attendant console
port). This transfers the call data to the Charge.dat file, which is created or updated whenever
a new record is entered. You can use software to evaluate this data.
● U P0/E port
An optiset E control adapter, to which you can attach a printer or PC, must be connected
to the U P0/E port. The system supports only one adapter per call data output.
● LAN interface (Ethernet)
CDRC data can be exported to external applications via the LAN interface (Ethernet) (for
more information, refer to Section 4.8, "Applications over IP").
Output Formats
The CDRC output can be in two different formats:
● Compressed format (via V.24/via LAN) for PC or call charge computer
The system outputs all data (including ACCT) without separating spaces, without headers,
and without form feed. Call charge pulses, call charge amounts or arithmetic units are output.
● Long format for printer
The system outputs all data (except ACCT) separated by spaces, with header (in the language
selected for the system) and form feed. The call charge amount is output.
P31003-H3570-Y100-4-7618, 2007-10-31
HiPath 3000/5000 V7, System Description 11-1