10.12.2012 Views

Administration HiPath 3000/5000 V7 IP systems

Administration HiPath 3000/5000 V7 IP systems

Administration HiPath 3000/5000 V7 IP systems

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>3000</strong>sb4.fm<br />

<strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong> in the LAN Network For internal use only<br />

HG 1500 V3.0<br />

New features of the HG 1500 V3.0<br />

● Transparent B channel for ISDN B channel protocols<br />

● Flexible port number administration<br />

● Dynamic jitter buffer<br />

● SNTP functionality in the LAN<br />

● Read rights to dynamic parameters of <strong>HiPath</strong><strong>3000</strong> manager in WBM<br />

● Improved firewall function (stateful inspection, DoS, application level gateways)<br />

● T.38 fax protocol standard support<br />

● Support for HFA workpoints such as optiPoint410 standard or optiPoint600 office<br />

● Logging of QoS data (Quality of Service)<br />

● Licensing system as for <strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong><br />

● Improved software management<br />

● Cooperation with <strong>HiPath</strong> 4000 V2.0, for example, DMC (Direct Media Connection)<br />

● Full VPN support (Virtual Private Network)<br />

● HG†1500†V3.0 as module of a PCS (PC-based communication server)<br />

● STMI2 board with 32 B channels onboard, expandable to 64 channels<br />

DMC<br />

This flag enables or disables the feature "DMC Interworking with <strong>HiPath</strong> 4000 Systems" (in<br />

short "DMC"). In a network with <strong>HiPath</strong> 4000, DMC enhances the voice quality between <strong>IP</strong> components<br />

(endpoints, gateways).<br />

DMC is only supported by the CorNet-NQ/CorNet-<strong>IP</strong> networking protocol.<br />

DMC should be disabled in a homogeneous <strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong> network. If a network with Hi-<br />

Path 4000 <strong>systems</strong> (version 2.0 or later) exists in which DMC is configured, the DMC feature<br />

should be enabled in the <strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong> <strong>systems</strong>.<br />

The HFA endpoints (optiPoint/optiClient) registered at the <strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong> system and the<br />

<strong>HiPath</strong> <strong>3000</strong> system itself are then in a position to accept DMC connections set up by the Hi-<br />

Path 4000 and its HFA endpoints. Even if the DMC feature is enabled, DMC is not performed<br />

between <strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong> <strong>systems</strong>.<br />

If DMC is enabled, the percentage of available DSP channel resources decreases. In other<br />

words, in a <strong>HiPath</strong> <strong>3000</strong> system only 80% of the channels provided for each DSP are available<br />

for connections (for example, 6 channels instead of 8, 12 channels instead of 16, 48 channels<br />

instead of 60).<br />

P31003-H3570-Y100-4-7618, 2007-10-31<br />

4-12 <strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong> <strong>V7</strong>, System Description

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!