Administration HiPath 3000/5000 V7 IP systems

3000sb1.fm
Introduction For internal use only
Features
Restrictions
● If neither of the participants in the original call (station A or B) is a TDM station, the HiPath
switching network is not involved at the time of activation and changeover is impossible
without briefly interrupting the connection between A and B.
● Stations A and C must be in the same node.
● Station C can only activate this feature in idle/standby status.
● Destination terminals for the Whisper feature (station A) can only be terminals with displays
controlled by the system (Optiset, optiPoint, optiClient).
As in HiPath 4000, CMI is not supported.
1.5.4 Privacy Release Key (MULAP)
Version 6.0 and later incorporates a new status called "Privacy Release". A new key was created
in the database for this. This key is supported by the following workpoint clients:
● Optiset E
● optiPoint 500
● optiPoint 600 (TDM only)
● optiClient 130
● OpenStage 20 TDM, OpenStage 40 TDM
The Privacy Release (MULAP) feature lets you release a busy MULAP line for a conference
during a call simply by pressing the "Privacy Release MULAP" button. This is indicated by a
flashing light on the stations of other MULAP members who can then join the call by pressing
the flashing MULAP button. This creates a conference which is signaled by tones and display
messages.
All members of a MULAP group can program a Privacy Release button on their stations. The
Privacy Release feature also works when a subscriber is participating in a conference, even if
the subscriber in question initiated the conference.
The Privacy Release button can be configured via Manager E.
P31003-H3570-Y100-4-7618, 2007-10-31
1-10 HiPath 3000/5000 V7, System Description