Administration HiPath 3000/5000 V7 IP systems

3000sb7.fm
Workpoints For internal use only
optiPoint 500 Product Family
The optiPoint application module can be connected to the following telephones:
● optiPoint 500 basic, optiPoint 500 standard, optiPoint 500 standard SL (U.S. only), opti-
Point 500 advance
When used in a TDM environment, the key module only supports the personal internal
phonebook.
● optiPoint 410 standard, optiPoint 410 advance, optiPoint 420 standard, optiPoint 420 advance
In VoIP environments, the key module supports functions, such as, personal phonebook,
LDAP, WAP browser, Java applications, voice dialing.
The optiPoint application module must always be connected as the first key module. In other
words, it must be directly connected to the telephone. Another key module can also be attached.
8.6.4.4 Possible Configurations for the Add-On Devices
The following table shows the possible configurations for add-on devices on telephones from
the optiPoint 500 family (not optiPoint 500 entry and optiPoint 500 economy).
Table 8-9 Add-On Device Configuration at an optiPoint 500 Telephone
optiPoint 500 telephone 1st add-on device 2nd add-on device
optiPoint key module –
optiPoint 500 basic
optiPoint key module optiPoint key module
optiPoint key module optiPoint BLF
optiPoint 500 standard, opti-
Point 500 standard SL (only
for U.S.)
optiPoint application module
optiPoint application module
–
optiPoint key module
optiPoint application module optiPoint BLF
optiPoint 500 advance
optiPoint BLF –
optiPoint BLF optiPoint BLF 1
1 Configuration with two optiPoint BLFs only with HiPath 3800.
P31003-H3570-Y100-4-7618, 2007-10-31
8-68 HiPath 3000/5000 V7, System Description