Administration HiPath 3000/5000 V7 IP systems

3000sb7.fm
Workpoints For internal use only
OpenStage Product Family (V7 R3 or Later)
8.1.3.2 OpenStage BLF
Figure 8-9 OpenStage BLF
The OpenStage BLF (Busy Lamp Field) is a key module which can be mounted on the side of
the workpoint, providing 90 freely-assignable function keys.
To guarantee sufficient power supply, an external AC power supply unit is necessary to operate
the BLF. Only the AC adapter originally supplied must be used for this purpose, see
Section 8.1.4.1, “External local power supply”. The AC adapter port depends on the
OpenStage BLF hardware output.
8.1.3.3 Possible Configurations for the Add-On Devices
The following table shows the allowed configurations of key modules at OpenStage workpoints
for the connection variant TDM and the connection variant CorNet IP. For workpoints which do
not appear in the table no application of key modules is possible.
Table 8-6 OpenStage workpoints - configurations of the add-on devices
Workpoint 1st add-on device 2nd add-on device
OpenStage40 OpenStage Key Module –
OpenStage Key Module OpenStage Key Module
OpenStage BLF –
OpenStage 60 OpenStage Key Module –
OpenStage Key Module OpenStage Key Module
OpenStage 80 OpenStage Key Module –
OpenStage Key Module OpenStage Key Module
P31003-H3570-Y100-4-7618, 2007-10-31
8-20 HiPath 3000/5000 V7, System Description