Administration HiPath 3000/5000 V7 IP systems

3000sb55.fm
For internal use only Access Points
HiPath AP 1120
7 Access Points
7.1 HiPath AP 1120
The system connects up to two telephones and/or fax devices to a corporate or carrier VoIP
network over a 10/100 BaseT Ethernet port. HiPath AP 1120 lets users upgrade simply, transparently,
and cost-effectively to an IP-based telephony infrastructure without having to forego
existing analog devices. The devices can dynamically recognize the most common IP telephony
codecs and fax protocols, including T.38 (UDP). These can be remotely administered and
upgraded using the Unit Manager Network.
HiPath AP 1120 connects up to two telephones and/or fax devices to a corporate or carrier VoIP
network over a 10/100 BaseT Ethernet port.
The devices recognize dynamically the most up-to-date IP telephony CODECs and fax protocols:
● T.38 (UDP)
● G.711
● G.723
● G.722
> Voice quality in G.722 is very good in internal traffic, but poor in external traffic be-
> The AP1120 can be used to transmit both voice (G.711) and fax (T.38) signals.
cause this protocol is not supported on all public routes.
The settings on the HG 1500 V3.0 should be identical with the settings in AP 1120.
These can be remotely administered and upgraded using the Unit Manager Network.
P31003-H3570-Y100-4-7618, 2007-10-31
HiPath 3000/5000 V7, System Description 7-1