10.12.2012 Views

Administration HiPath 3000/5000 V7 IP systems

Administration HiPath 3000/5000 V7 IP systems

Administration HiPath 3000/5000 V7 IP systems

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>3000</strong>sb4.fm<br />

<strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong> in the LAN Network For internal use only<br />

HG 1500 V3.0<br />

● HXGM: Up to eight boards can be installed in an <strong>HiPath</strong> 3700/3750. With two PDM1 expansion<br />

modules, each HXGM offers up to 32 <strong>IP</strong> channels for voice connections (Voice<br />

over <strong>IP</strong>).<br />

● HXGS (wall housing) or HXGR (19" housing): Up to four boards can be installed in <strong>HiPath</strong><br />

3500/3550 and up to two in <strong>HiPath</strong> 3300/3350. Both boards can process up to 16 <strong>IP</strong> channels<br />

for voice connections with a single PDM1 expansion module.<br />

The <strong>IP</strong> networked <strong>systems</strong> and the HG 1500 V3.0 boards are administered with two different<br />

tools:<br />

● <strong>HiPath</strong> <strong>3000</strong> Manager E: Extending the existing <strong>HiPath</strong> <strong>3000</strong> customer database to include<br />

information for <strong>IP</strong> networking.<br />

● HG 1500 V3.0 WBM: Performing HG 1500 V3.0 board settings.<br />

> The <strong>IP</strong> address used for <strong>IP</strong> networking is always that of the first LAN interface. If <strong>IP</strong><br />

networking is routed via another interface, such as LAN2, use <strong>IP</strong> routing entries to<br />

ensure that the LAN1 interface can be reached.<br />

4.5.4.1 General Parameters for Voice over <strong>IP</strong><br />

Before configuring system clients and H.323 clients, you must configure the valid parameters<br />

for both variants in <strong>HiPath</strong> <strong>3000</strong> Manager E:<br />

● Echo:<br />

You can define here how to compensate for the echoes that occur in connections to conventional<br />

telephones via the voice gateway.<br />

● Traffic statistics:<br />

This is where you define whether to record traffic statistics which can then be queried via<br />

SNMP.<br />

● Encoding:<br />

This parameter is used to select which voice coding will be implemented.<br />

4.5.4.2 Voice Coding<br />

<strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong> supports voice compression according to the G.729 and G723.1 standards.<br />

G.723.1 facilitates the use of teleworking via ISDN for example, and reduces the load on the<br />

existing data network. G.723.1 reduces the Vo<strong>IP</strong> bandwidth requirement for voice communication.<br />

This enables a bidirectional voice connection via an ISDN B channel. This, in turn, facilitates<br />

the connection of teleworkstations or branch offices to the company network via a 64 KB<br />

connection. However, it is not advisable to operate other applications (such as Application<br />

Sharing, File Transfer) in addition to a bidirectional Vo<strong>IP</strong> connection simultaneously via 64 Kbps<br />

since this generally leads to a deterioration in voice quality. It is recommended that both B channels<br />

of an S0 connection are used for this purpose.<br />

P31003-H3570-Y100-4-7618, 2007-10-31<br />

4-22 <strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong> <strong>V7</strong>, System Description

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!