Administration HiPath 3000/5000 V7 IP systems

3000sb5.fm
Serviceability For internal use only
Options in the Service Department
5.3.2 Relocate/Transfer Application Processor Software (APS)
> APS replacement/transfer is not possible with HiPath 5000. You must perform a
For system software updates, a distinction is made between
● HiPath 3000 systems without HiPath Software Manager and
● HiPath 3000 systems with HiPath Software Manager.
For networked HiPath 3000 systems with HiPath 5000 Server, an APS update can only be performed
with HiPath Software Manager.
5.3.2.1 APS Replacement/Transfer for HiPath 3000 Systems Without HiPath
Software Manager
Two memory areas for the application processor software are reserved on the MMC. To be able
to store two complete APS and to keep the transfer time as low as possible, part of an APS is
stored in a compressed format. The APS is decompressed after it has been transferred from
the MMC into the SDRAM area of the central control board.
5.3.2.1.1 Transferring an APS of HiPath 3000 by Replacing the MMC
> APS replacement is only possible within a version and if a logical, compatible CDB
5.3.2.1.2 APS Transfer
Options
complete software upgrade.
is available.
The APS Transfer feature is available with the HiPath 3000/5000 Manager E. It facilitates
● an on-site APS transfer by connecting directly using the V.24 interface.
● an APS transfer via remote service from a central service center using the integrated analog
or digital modem or via LAN.
P31003-H3570-Y100-4-7618, 2007-10-31
5-8 HiPath 3000/5000 V7, System Description