10.12.2012 Views

Administration HiPath 3000/5000 V7 IP systems

Administration HiPath 3000/5000 V7 IP systems

Administration HiPath 3000/5000 V7 IP systems

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>3000</strong>sb3.fm<br />

For internal use only <strong>HiPath</strong> <strong>5000</strong> System Overview<br />

Software Structure<br />

The following table shows the most important features of the Feature Server.<br />

Table 3-1 Feature Server Components<br />

Component Function<br />

vsrv.exe Basic Feature Server component. As an MS Windows service, it starts all<br />

other components.<br />

vaplx.dll Logical interface for applications. Provides read-only and read/write access<br />

to CDB data.<br />

cars.exe The Call Address Resolution Server provides the HG 1500 boards with the<br />

call numbers of all <strong>HiPath</strong> <strong>3000</strong> <strong>systems</strong> (nodes) that belong to the network.<br />

Note: Event 1027 confirms that the corresponding HG 1500 board was<br />

successfully downloaded with the call numbers of all <strong>HiPath</strong> <strong>3000</strong> <strong>systems</strong><br />

associated with the network.<br />

regserver.exe<br />

Presence Manager<br />

Following startup, the HG 1500 boards automatically log on to the Feature<br />

Server over the Registration Server.<br />

vsync.exe All “node-specific” CDB changes (for example, by key programming, Manager<br />

T) are reported by the node to the Feature server’s VSYNC process.<br />

This ensures the automatic synchronization of the Feature Server with the<br />

new CDB data.<br />

FCT.dll Interface to the <strong>systems</strong> for direct CDB data access.<br />

This is a Feature Server service for signaling the call processing station states “free”, “busy”<br />

and “call” using the LEDs on the optiset E and optiPoint telephones in a <strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong> network.<br />

You can pick up a call by pressing the appropriate button.<br />

Call processing states can only be signaled for a station if the Presence Manager can set a<br />

CSTA monitor point on the relevant station. The status of a MULAP call number cannot be signaled,<br />

for example, because a CSTA monitor point cannot be set on a call number of this type.<br />

The dssserver.exe service for the Presence Manager is installed with the <strong>HiPath</strong> <strong>5000</strong> software.<br />

This is a user-configured service that receives its information from vaplx.dll. The TAPI Service<br />

Provider is required for the Presence Manager to work.<br />

P31003-H3570-Y100-4-7618, 2007-10-31<br />

<strong>HiPath</strong> <strong>3000</strong>/<strong>5000</strong> <strong>V7</strong>, System Description 3-5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!