Administration HiPath 3000/5000 V7 IP systems

3000sb11.fm
Identifying System Power Requirement For internal use only
HiPath 3800 Boards Power Requirement
A.1 HiPath 3800 Boards Power Requirement
Table A-1 Nominal Output of the HiPath 3800 Power Supply Unit
Power supply unit Part number Max. Nominal Output in W
5 V –48 V
LUNA2 S30122-K7686-L1
S30122-K7686-M1
1401 1 The total max. nominal output at the 5-V and at the –48-V output is 140 W. The 5-V nominal output can vary between 30
and 60 W and the –48-V nominal output can vary between 80 and 110 W. In other words, if 30 W are withdrawn at the 5-
V output, a maximum of 110 W is available at the –48-V output.
> You must check whether the total power requirement of the boards used and the
connected workpoint clients of a system cabinet exceeds the maximum possible
LUNA2 output. Section A.7 contains a sample calculation.
Table A-2 HiPath 3800 Board Power Requirement
Board or Component Part number Net Power Requirement in
W
5 V –48 V
CBSAP S30810-Q2314-X 10,0 –
DBSAP S30807-Q6722-X 1,5 –
DIU2U S30810-Q2216-X 5,1 –
DIUN2 S30810-Q2196-X 5,0 –
IVMN8 S30122-H7688-X100 10,0 –
IVMNL S30122-H7688-X 10,0 –
PDMX S30807-Q5697-X200 3,0 –
REALS S30807-Q6629-X 1,5 –
SLCN S30810-Q2193-X300 5,0 –
SLMA S30810-Q2191-C300 1,6 12,0
SLMA8 S30810-Q2191-C100 0,6 4,0
SLMO2 S30810-Q2168-X10 1,0 1,2
SLMO8 S30810-Q2168-X100 0,4 0,4
STMD3 S30810-Q2217-X10 4,0 –
S30810-Q2217-X110 4,0 1,5
STMI2 S30810-Q2316-X100 16,3 –
P31003-H3570-Y100-4-7618, 2007-10-31
A-2 HiPath 3000/5000 V7, System Description