Administration HiPath 3000/5000 V7 IP systems

3000sb2.fm
For internal use only HiPath 3000 System Overview
HiPath 3550
2.3.4.2 Trunk Boards
Table 2-13 Trunk Boards for HiPath 3550
Board
Name
Ports per board
Capacity Country
B channels per board
TCAS-2 2 60 1
Max. number of
boards per system
ROW
U.S.
Type/Description
1 x 2
- Board for supporting country-specific
CAS (Channel Associated Signaling) protocols
x - Trunk board for analog lines
x - Trunk board for analog lines
x - Trunk board for analog lines including ALUM
x - Trunk board for analog lines
TLA 2 # 3
TLA4 4 # 3
TLANI4 4 # 3
TLA8 8 # 3
TS2 30 30 1 x - Board for primary rate access; can be used for tie trunk traffic.
In HiPath 3000/5000 V5.0 and later, the B channels in the
TS2 board are subject to license. Consequently, the TS2
boards (S30810-Q2913-X300) have been assigned a new
hardware identification code. The new code prevents the
board from being used in earlier versions. Functionality and
layout of the board have not been changed.
STLS2 2 4 # 3
x - Board for ISDN basic rate access.
STLS4 4 8 #
Configuration of ISDN trunks, tie trunks, and stations (no
feeding) on the same board is possible.
3
x x
TST1 1 24 1 - x PRI board
TMGL4 4 # 3
- x Trunk board for analog lines
TMQ4 4 8 # 3
- x BRI board
1 TCAS-2 provides two E1 CAS interfaces which, combined, can support up to 60 B channels. As HiPath 3550 supports a
maximum of 30 B channels, a total of up to 30 B channels may be used.
2 For selected countries only
3 The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.1, "System-Related
Capacity Limits".
P31003-H3570-Y100-4-7618, 2007-10-31
HiPath 3000/5000 V7, System Description 2-35