Administration HiPath 3000/5000 V7 IP systems

3000sb2.fm
HiPath 3000 System Overview For internal use only
HiPath 3800
2.2.4.3 LIMS
The LAN Interface Module for SAPP LIMS (S30807-Q6721-X) is an optional plug-in card for
the CBSAP central control board in HiPath 3800.
The board provides two Ethernet (10BaseT) LAN connections via two 8-pin RJ45 jacks:
● LAN1 (administration via HiPath 3000/5000 Manager E and CTI functions)
● LAN2 (not assigned)
The LIMS module can be used for administration via HiPath 3000/5000 Manager E and for CTI
functions (TAPI 120 V2.0). However, bear in mind that the number of BHCAs (Busy Hour Call
Attempts = number of connection attempts during busy traffic hours) is restricted to 400 at a
maximum of six TAPI ports. The use of "power dialers" is not approved.
You cannot operate the LIMS module and an STMI2 board simultaneously in a HiPath 3800.
2.2.4.4 CSAPE
The cPCI cassette CSAPE (Central Shelf Access Point Emergency) can be installed in the basic
cabinet in HiPath 3800 V6.0 or later. The cPCI cassette features two fan drawers, the AC
power supply ACPCI (part number S30124-X5166-X), and two slide-in shelves for the embedded
application server (EAS).
CSAPE is required to operate HiPath All-in-One applications. For information on the applications
supported, refer to the product documentation for HiPath All-in-One.
The cPCI cassette CSAPE is only mechanically installed in the system, that is, there are no
electrical connections between the system and the cPCI cassette CSAPE. HiPath 3800 communicates
exclusively with HiPath All-in-One over the IP network.
P31003-H3570-Y100-4-7618, 2007-10-31
2-20 HiPath 3000/5000 V7, System Description