Administration HiPath 3000/5000 V7 IP systems

3000sb7.fm
Workpoints For internal use only
optiPoint 500 Product Family
optiPoint analog adapter
The adapter must always have a local power supply for operating the connected analog device.
T/R interface properties:
● Supply current: 30 mA
● Busy signal when both B channels are busy
● Ring sequence: 2.2
● Supports only DTMF with Flash
● No ground signaling allowed
The optiPoint analog adapter allows an analog device
(such as telephone (DTMF only), group 3 fax, modem,
cordless telephone) to be connected to the optiPoint
500 telephone.
The connected analog device can send and receive
calls to the system on the U P0/E interface regardless
of the connection status of the optiPoint 500 telephone,
as long as a B channel is available.
Does not support: VoiceMail server with T/R interface, message waiting lamp, dictating equipment,
speaker, announcement device (such as start/stop).
P31003-H3570-Y100-4-7618, 2007-10-31
8-70 HiPath 3000/5000 V7, System Description