Administration HiPath 3000/5000 V7 IP systems

3000sb3.fm
HiPath 5000 System Overview For internal use only
Server Networking
Bandwidth Requirements for Additional Services:
The specified values represent the load in relation to a maximum call volume of 1400 BHCA
(this is the maximum traffic with a connected call center solution).
Type Record size Bandwidth requirement
Busy signal
(optiClient Attendant)
300 bytes 3 Kbps
Call detail records 200 bytes 1 Kbps
ACD information 3.5 KB 10 Kbps
Bandwidth Requirements for Administration (valid only for HPCO):
The specified bandwidth represents the worst case scenario. In other words, an entire CDB is
sent to the server from the HiPath node every 30 seconds (max.) as a result of the synchronization
process configured in the system.
It is difficult to define an accurate value at the moment due to the lack of data from the field.
However, the bandwidth requirement will, in practice, be well below 132 Kbps, or there will be
short-term peaks during which this value will be required by the network.
In practice, the most frequent application is the call up of key programming by users. A block of
64 KB is transferred in this process. An accepted period of 30 seconds for the transmission process
results in bandwidth requirements of 18 Kbps.
Type Record size Bandwidth requirement
Synch by Hicom per TFTP 607232 bytes 132 Kbps
P31003-H3570-Y100-4-7618, 2007-10-31
3-12 HiPath 3000/5000 V7, System Description