02 - BTI - We know your business

1006
�
�
�
�
�
�
�
�
�
�
�����
Diamond drill
Galvanized diamond drill for extremely hard materials
� No damage to edges of drill hole in addition to
completely clean and precise drilling
� Can be used in all commercially available cordless
screwdrivers or all drills
Special diamond drill with water connection is not
required
Range of application:
Hard tiles, tiles, fine stoneware, ceramics, granite slabs
Diamond drill full set
� Complete set in SYSTRA modul 2 consisting of a
diamond drill in each of the following sizes dia. 4,
6, 8, 10, 12 mm, 1 centering device,
1 pressure spray, 1 flexible hose
Diamond drill set
� 5 piece set consisting of a diamond drill in each of
the following sizes dia. 4, 6, 8, 10, 12 mm,
Centering device
� For accurate centering of the diamond drill as well
as for the water cooling connected to the pressure
spray
� For diamond drills of dia. 4, 6, 8, 10, 12 mm
Pressure spray
� Pressure spray with 1 liter container for water
cooling of the diamond drill connected to the
centering device
Flexible hose 2m
� In order to connect the pressure spray and the
centering device
Item Unit dia. Total Fig.
number Pieces mm length mm no.
006951 1 4 65 �
006952 1 6 65 �
006953 1 8 65 �
006954 1 10 65 �
006955 1 12 65 �
04-905
Usage guidelines:
A rotational speed of approx. 500 rpm is the ideal
setting in order to achieve the optimum ratio between
drilling progress and service life.
Do not exert any extra force when drilling: Let the drill
“do its work”!
Always use the diamond drill in combination with the
centering device. This ensures that the diamond drill
is correctly used and prevents it from slipping off the
workpiece. Using the centering device also reduces the
risk of cracking tiles.
At every opportunity when working use water to cool it
down, this substantially increases the service life of
the drill.
Item Unit dia. Total Fig.
number Pieces mm length mm no.
006963 5 4 65 �
006970 5 6 65 �
006987 5 8 65 �
006988 5 10 65 �
006989 5 12 65 �
Item Unit Designation Fig.
number Pieces No.
006991 1 Diamond drill complete set in SYSTRA Modul �
006990 1 Diamond drill set 4 – 12 mm �
006994 1 Centering device �
006992 1 Pressure spray 1 l �
006993 1 Flexible hose 2 m �
04-905
When working with water cooling, only use the cordless
machine! There is a risk of electric shock when using
mains operated drills!
Once the tiles or fine stoneware have been bored
through, a normal hammer or stone drill should be used
for further drilling depending on the subsurface. When
used on concrete, masonry or similar, the diamond
drill's operating life is reduced considerably in comparison
with hard materials.
HWP
04-905
WWW.bTI-GRoUP.Com
04
b
121