02 - BTI - We know your business

1006
�����
Stex universal angle mount set SX 35
Design/Assembly:
g The angle mounts you can use for almost all
corner connections
g Secure holding mechanism: Insert the Stex angle
mount, turn it and it sits tight!
g For installing traverses
g For connection to normal profile rails
g Stex universal angle mount set with rotatable Stex
board for subsequent installation of traverses
Designation weight Unit Item
kg/piece Pieces number
Stex universal angle mount set SX 35 0.152 25 016211
Stex angle mount SX 35
Design/Assembly:
g Secure holding mechanism: Insert the Stex angle
mount, turn it and it sits tight!
g For simple corner connections
g Pre-assembled screws
Designation weight Unit Item
kg/piece Pieces number
Stex angle mount SX 35 0.125 25 016210
Saddle flange SX 35/35
Design/Assembly:
g For floor and ceiling assembly
g For wall assemblies with support on both sides
g Suitable for Stex assembly rail SX 35/35
Technical data:
g Material S235JR
g Galvanized
g with hex screw M8 x 35,
Strength class 8.8 and M8 nut
Assembly instructions:
We recommend using u-shims to assemble the Stex support
g Height-adjustment of threaded rods or pins
possible
g The threaded rods or threaded pins must be
locked by a nut
Technical data:
g Material S235JR
g Galvanized
g Screws: M 8 x 16, DIN 933 strength class 8.8
Technical data:
g Material S235JR
g Galvanized
g Screws: M8 x 16, DIN 933 strength class 8.8
Designation Perm. pull weight Unit Item
Load F kg/piece Pieces number
kN
Saddle flange SX 35/35 2 0.132 10 016192
www.BTI-GROUP.COM
07
C
503