02 - BTI - We know your business

1006
LUBRICATING + PROTECTING
Dvgw*-certified
and approved
�����
thread cutting agent Dvgw*
the synthetic thread cutting agent corresponds to the w 521 Dvgw work sheet in requirements and testing and
can thus be used to install drinking water pipes. universally applicable for drilling and cutting tools.
g Dvgw-certified and approved
g Free from mineral oil
g can be used on all standard steels and aluminum
g odorless and low steam development
g reduces the temperature and prevents vibration
g No amalgamation or gumming
g Biologically degradable
g marked red for better identification
g Secure from cold up to -10 °c
g can be mixed with water, also ideal as cooling
lubricant
* Deutsche Vereinigung des Gas- und Wasserfaches e.V. –
Technisch-wissenschaftlicher Verein = DVGW German Technical and
Scientific Association for Gas and Water
Drilling and cutting oil
A thread cutting agent on mineral oil basis; universally applicable for drilling and cutting tools
g For all high-alloy and stainless steels,
non-ferrous metals and aluminum
g Extension of tool life cycle
g improvement of dimension tolerances
and surface texture
g improvement of corrosion protection
g contains no chloride nor pcB/pct
g Secure from cold up to -15 °c
g good lubricating effect
g physiologically sound
g Not aggressive on alloy metals,
compatible with plastics
Lubricants
For Ht pipe connections and plastic connecting sleeves
g Excellent sliding effect
g product does not expire
g Free from chloride, formaldehyde
and polycyclic aromas
g Does not contain any components
hazardous to health
g Does not inflame skin
g water-soluble and biologically degradable
g Secure from frost up to -5 °c
range of application:
BTI thread cutting agents are used where for installation
purposed threads are cut on drinking water pipes and
other water consumption devices; use undiluted to
achieve an ideal cutting quality
processing instructions:
Apply the BTI thread cutting agent on the parts to be
processed, drill, thread cutting tools, etc.
item unit container content
number pieces l
019726 1 canister 5
08-503 A/P 08503AA
range of application:
BTI drilling and cutting oil is used to cut threads on
pipes, which do not come into contact with drinking
water, in undiluted form
processing instructions:
Apply the BTI drilling and cutting oil on the parts to be
processed, drills, thread cutting tools, etc.
item unit container content
number pieces l
019728 1 canister 5
08-503 A/P 08503AB
processing instructions:
Thinly apply BTI lubricant on the sleeves to be
connected and connect.
item unit container content
number pieces g
000567 1/12 tube 250
08-550 A/P 08550
The details specified in this publication are based on our current knowledge and experience. Due to the abundance of possible processing and application influences this information does not release the processor from performing his
own tests and trials. Legally binding assurance of certain characteristics or suitability for a concrete implementation objective can not be derived from this information.
www.Bti-group.com
08
B
605