02 - BTI - We know your business

1006
BONDING + SEALING
�����
Injection cork
One-component, rigid plastic insulation compound made of adhesive-bound cork granulate
g Verified quality
g Air sound insulation acc. to DIN 52210 and heat
conductivity acc. to DIN 52612 verified by the
Fraunhofer Institute for construction physics
Stuttgart
g Simple processing with sealing compound pistol
g Non-foaming
Range of application:
For sound and heat insulation of joints in window and
door construction to masonry or doors in dividing walls;
ideal for sound protection windows and doors, joint
gaps in sheet plates, stones, wood and masonry
Processing instructions:
When gluing to surfaces ensure they are clean, dry
and stable. Joints must be protected from effects of
the weather by an elastic sealing compound (SI-N).
Both the interior and the exterior must be sealed.
Contaminations can be removed with petrol. Must not
be subject to mechanical strain.
Technical data
Base cork granulate bound with
solvent adhesive
Material density approx. 0.35 g/ml
Processing with standard manual
air compressed-air pistol
Drying time approx. 6 – 12 hrs, acc. to
temperature conditions
Temperature stability -30 °C to +120 °C
Usage temperature +5 °C to +35 °C
Heat conductivity approx. 0.044 W/mK
Building material class B2
Flash point below +21 °C
Shelf life at +20 °C 12 months
Item Unit Designation Container Content
number Pieces ml
434949 30 Injection cork tube 500
08-120 A/P/T 08120
The details specified in this publication are based on our current knowledge and experience. Due to the abundance of possible processing and application influences this information does not release the processor from performing his
own tests and trials. Legally binding assurance of certain characteristics or suitability for a concrete implementation objective can not be derived from this information.
WWW.bTI-gROUP.COM
08
A
565