02 - BTI - We know your business

1006
BONDING + SEALING
�����
Spray adhesive
g Does not corrode polystyrene
g With adjustable nozzle
Range of application:
For adhesion of foam, plastics, rubber, carpet coatings,
styrofoam, metal, glass, wood, paper and cardboard
Superglue
For quick gluing of nearly all materials
g Very quickly setting adhesives
g High mechanic strength
g Age, temperature and solvent resistant
g Curing is carried out by intake of air humidity
g good adhesion on many materials
Superglue application areas:
For adhesion of precisely fitting parts with small glue
joints up to 0.1 mm; ideal for metals, rubber and many
plastics
Superglue non-dripping application areas:
For adhesion of porous materials with large glue joints
up to 0.5 mm; ideal for wood, rubber and many plastics;
also suitable for metal
Processing instructions:
Shake the can hard before use. Clean adhesion surfaces
from dirt, oil and grease. Spray adhesive from approx.
20 cm distance. Air for approx. 5 to 15 min. depending
on surface and layer thickness.
Connect parts and press hard. For slight requirements
one-side application is sufficient. After use turn can
and empty valve.
Item Unit Container Content
number Pieces ml
015911 6 aerosol can 300
08-313 A/P 08313
Processing instructions:
Apply cyanoacrylate adhesives in small drops.
The thinner the adhesive film, the faster the curing.
One-sided application is sufficient. Connect parts under
sufficient pressure. The surfaces must be free from dirt,
oil and fat.
Attention:
Not suitable for fabric, paper, Teflon, polyethylene
and polypropylene.
Technical data
Final strength approx. 12 h
Temperature stability - 60 °C to +80 °C
Shelf life at room temperature 6 months
Shelf life at 0 °C to +5 °C 12 months
Item Unit Designation Container Content
number Pieces g
004108 1/15 Superglue bottle 20
004109 1/15 Superglue non-dripping bottle 20
08-318 A/P 08318
The details specified in this publication are based on our current knowledge and experience. Due to the abundance of possible processing and application influences this information does not release the processor from performing his
own tests and trials. Legally binding assurance of certain characteristics or suitability for a concrete implementation objective can not be derived from this information.
WWW.bTI-gROUP.COM
08
b
599