02 - BTI - We know your business

www.BTI-GROUP.COM
07
B
�
�
�����
PE noise-insulation products
Used to avoid noise bridges and creaking sounds between the sanitary ceramics and the tiles
g Material: woven special, high density PE foam with
to compensate for light surface irregularities, for
fixed grate-free seating
g Reduces strain and therefore crack formation at
the ceramic parts
g Acid-proof
Ceramic assembly tape
g Glue on assembly strips at a low distance from the
outer edge (self-adhesive)
g Mount object and seal permanently elastic
Noise-insulation mat/set
g Compatible with all commercially available joint
sealing compounds
No coloring of contacts
g High compression strength and creepingresistance
to accept the static and dynamic loads
No readjustment of the sanitary ceramics required
Processing instructions:
Assembly surfaces must be dry, grease-free and dry
Item Unit Designation Rolls working Thickness width
number Roll length m length m mm mm
030081 12 ceramic assembly tape 4.5 9 3 36
07-460 A/P 07460
g Very good noise reduction due to high-quality PE
foam with a raw density of 100 kg/m³
Noise-insulation mat for standing wC
Item Unit Designation
number Pieces
009517 1/10 Noise-insulation mat for standing Wc
Scope of delivery of set:
1 noise-insulation mat WT or Wc
2 noise-insulation sleeves
2 noise-insulation rosettes
2 u-shims 13 x 35 x 1.5
Item Unit Designation Fig. Area of use
number Pieces no.
001827 1/10 Noise-insulation mat/Set WT � Washstand
000157 1/10 Noise-insulation mat/Set Wc � Wc and bidet
07-460 A/P 07460AA
07-460 A 07460AE P 07460AD
488 1006