07.01.2013 Views

02 - BTI - We know your business

02 - BTI - We know your business

02 - BTI - We know your business

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

1006<br />

�����<br />

Roof membranes and accessories<br />

Battens<br />

Counter batten<br />

Coverage ~ 15 cm<br />

Sheathing Heat insulation<br />

Roof membrane uSb 175<br />

Coverage marker<br />

Rafters<br />

Airtight<br />

layer/<br />

vapor seal<br />

Highly porous, extremely water-resistant, special layered roof membrane/underlay that<br />

can be laid directly onto heat insulation or wood sheathing<br />

g can be used in whole of steep roof area<br />

g Highly porous<br />

g Extremely water-resistant<br />

g uV-stabilized<br />

g Anti-glare<br />

g tearproof<br />

Range of application:<br />

Can be laid directly onto heat insulation or wood<br />

sheathing in the whole of the steep roof area.<br />

Processing instructions:<br />

Lay the Roof Membrane 175 horizontally with approx.<br />

15 cm coverage on the heat insulation or in the right<br />

corner of the rafters. It must be free of tension but<br />

without sag. If the roof pitch is up to 6° lower than the<br />

standard pitch, the coverage area must be minimum<br />

20 cm (the <strong>BTI</strong> USB 175 writing acts as the coverage<br />

marker for the roof pitch standard). If you are insulating<br />

up to the ridge, lay the USB 175 over the ridge with<br />

a minimum overlap of 30 cm. Conceal the USB 175 and<br />

secure it in place in the coverage area. Fix it in place<br />

step by step by securing the counter batten. Use <strong>BTI</strong><br />

Nail Seal Tape for optimal sealing of nail holes. Conceal<br />

the USB 175 and secure it in place in the overlap<br />

area. Use USB Adhesive Tape to repair any damage and<br />

glue joints and overlapping edges.<br />

technical data<br />

uSb 100<br />

(w/o sheathing)<br />

uSb 140<br />

uSb 175<br />

uSb adhesive tape<br />

Vapor seal sheeting<br />

Material special layered<br />

polypropylene spun fleece<br />

Color gray/black<br />

<strong>We</strong>ight per unit area approx. 175 g/m²<br />

Width of membrane 1.5 m<br />

Roll length 50 m<br />

Roll weight approx. 14 kg<br />

Rolls per palett 24 (1,800 m²)<br />

Max. tensile load lengthw./crossw. 240/180 N/5 cm<br />

DIN EN 29073-3<br />

Nail withdrawal resistance EN 12310-1/B > 52 N<br />

Building materials class (DIN 41<strong>02</strong>-1) B2<br />

Temperature stability -40 °C to +80 °C<br />

UV stability for 6 months<br />

Water column > 2,000 mm<br />

Sd value approx. 0.08 m (Lyssy)<br />

item unit Designation Roll area<br />

number m 2 m 2<br />

000461 75 USB 175 75<br />

03-130 A/P/T 03<br />

WWW.bti-gROuP.cOM<br />

03<br />

73

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!