02 - BTI - We know your business

1006
CARE + CLEANING
�����
Sealing remover
Unbeatable for sealing, color and adhesive residue
g Simple and material-saving work
Special solvent allows simple removing of residue
without damaging the surfaces
g Also usable on vertical surfaces
Due to its good adhesion, the sealing remover can
also be used on vertical surfaces
Range of application:
Easily removes residue from sealing, sealing compounds,
cured adhesive residues, paint, varnish, oil, grease,
tar and resin residue, color pickling for metal surfaces;
removing stickers
Metal cleaner
Cleans and degreases powerfully
g Can be used nearly anywhere
Varnish and surfaces are not corroded
g Above-average cleaning performance at short
residence time
Even very rough soiling can be quickly and reliably
removed
g Residue-free
Evaporates very quickly without residue and forming
drops at nearly constant temperature
Welding protection spray
Prevents damage through welding sprinkling
g No difficulty post-processing
Components and tools are protected from welding
sprinkling, a thin protective film prevents adhesion
of welding beads on the welding nozzle and
components
g No difficult cleaning after welding required
Components can be easily post-treated,
e.g. browning, varnishing or galvanising
g Varnishing after or during welding is not impaired
Silicone-free protective film, there is no paint or
varnish-repellent separating film on adjoining
components
Processing instructions:
Cover varnished surfaces, plastics and rubber. Shake
the can before use. Apply plenty of sealing remover
and let it work in for 10 – 20 minutes. Remove treated
residue with spatula. Repeat, if required. To remove
graffiti, spray it and immediately wash off with a wet
sponge or cloth. Repeat, if required. Apply in well-aired
areas only. Always test the compatibility of varnish and
plastic in an inconspicuous place. Please observe that
parts can be made from various materials.
Item Unit Container Content
number Pieces ml
016870 6 aerosol can 300
The details specified in this publication are based on our current knowledge and experience. Due to the abundance of possible processing and application influences this information does not release the processor from performing his
own tests and trials. Legally binding assurance of certain characteristics or suitability for a concrete implementation objective can not be derived from this information.
08-510
Range of application:
For preparation of varnishing and adhesion on metal,
glass and ceramics; cleaning and degreasing of
machines and motor parts as well as sliding, friction
and adhesive surfaces; for removing oil and grease
residue as well as silicone
Processing instructions:
Punctiform spraying with spray pipe, wide area spray
without spray pipe
Item Unit Container Content
number Pieces ml
015596 6 aerosol can 300
08-513
Processing instructions:
Shake can before use, spray welding beads from approx.
15 cm distance, spray components from approx. 30 cm
in the area of 10 cm right and left of the weld seam, also in
tight rooms or hollow bodies welding can be performed
directly after spraying, non-flammable
Item Unit Container Content
number Pieces ml
015970 6 aerosol can 300
08-509
WWW.bTI-gROUP.COM
08
b
611